Formulators

RSS

Almost two-thirds of adhesives produced each year in the U.S. are from non-renewable petroleum resources. However, each year brings added pressure to search for alternatives to petroleum-based adhesives, as oil prices rise and concerns over pollution released during the manufacture of these products grow.

Mussels can be a delicious meal, but the chemistry that lets mussels stick to underwater surfaces may also provide a highly adhesive wound closure and more effective healing from surgery.

Today’s hot-melt formulators face many challenges, including variations in the availability of raw material supply and the pressure to reduce formulation costs. High-efficiency polymers can help formulators by reducing formulation viscosity or increasing formulation flexibility, which allows for the exchange of resin or oil for polymers.

Acrylic polymers are widely used in pressure-sensitive adhesive (PSA) applications in the form of emulsion, solvent or radiation-cured systems. They combine good UV resistance, transparency, tailored tack, and stiffness due to a large choice of acrylic and methacrylic comonomers.

The Pressure Sensitive Tape Council’s Tape Summit 2013 will be held May 13-17 at the Sheraton New Orleans Hotel in New Orleans, La. Industry professionals will benefit from a variety of focused learning opportunities, including Tape University, TECH 36, and the Exhibitor and Technical Poster events.

I would like to achieve the high performance of a two-component polyurethane coating, but my application process is only able to handle a one-component system. Can any existing formulations help me make this performance leap?

Over the past couple of years, the concept of alternative assessment (AA) has become much more common in the regulatory environment.

For many years, we have been hearing about green adhesives, paints, household cleaners and buildings—basically, green everything.

Technological advancements, industry innovations and regulatory updates: all these features and more will be highlighted at the 2013 Adhesive and Sealant Council (ASC) Spring Conference and Expo in Atlanta, Ga. The adhesives and sealants community will gather at the Hyatt Regency from April 21-23 to share business information, discover the latest innovations, and network with industry leaders.

Today’s elastomeric joint sealants are quite remarkable. For a relatively low cost, they provide much of the protection against air or water intrusion for many types of assemblies. In these applications, a sealant must adhere tenaciously to the substrates and maintain prolonged flexibility while being bombarded by wind, rain, heat, ultraviolet (UV) light, ice, dirt, and so on.