Sealant Equipment & Engineering Inc.’s new 2151-482 Series Servo-MixTMDynamic Mix and Dispense Valves are designed for precise mixing and dispensing of two-component materials in robotic and semi-automatic product assembly processes. The dispensing applications include mixing epoxies, silicones and urethanes for bonding, gasketing, coating, potting, and filling applications in aerospace, appliance, contractor, defense, electronics, filters, marine, medical, sporting goods, automotive, truck, and bus assembly dispensing applications.

The unique mixer design incorporates two features. First, a standard disposable static mixer element is attached to the drive shaft of a variable-speed servo motor for low- to high-speed mixing set by the operator on the control panel interface screen.

The second design feature uses two of the company’s standard No-Drip®KISS®Series fluid control valves to start and stop the flow of part A and part B materials into the Servo-Mix dispense valve. These valves feature carbide ball needles and seats for long service life with abrasive materials. The fluid control valves are used in place of typical check valves, which are prone to leak and cause maintenance issues. Also, the independent valves can be timed to reduce lead-lag issues and allow resin purging the mixer.

The Servo-Mix Dynamic Mix Valve is available for ambient and controlled temperature dispensing applications for critical curing processes. A temperature control manifold assembly is available to maintain a material temperature set point incorporating a closed-loop temperature transducer.

For more information, visitwww.SealantEquipment.com/2151-482.