Articles Tagged with ''gap fillers''

By choosing alternative thermally conductive gap fillers, EV manufacturers can streamline production processes and simplify battery module repair and recyclability.

Henkel launches next generation thermal gap filler range to manage heat in automotive applications.

It may be a one- or two-part system. We need temperature resistance up to 500˚C, and the adhesive will be applied to fill small gaps in a hot mild steel structure. The required initial setting time is 5 min.

Electric vehicles (EVs) have been rapidly adopted in recent years, and the rate of market growth has shown to be significantly higher than that of the fuel-injected automotive market. Indeed, the global stock of electric cars surpassed five million in 2018.

The new epoxy-based Vitralit UC 6025 adhesive from Panacol reportedly optimizes automated assembly processes.

In an effort to advance silicones for automotive light detection and ranging (LiDAR) applications, Shin-Etsu Silicones of America, Inc. (SESA) will exhibit at the second annual Automotive LiDAR 2019 Conference and Exhibition.

At the 2019 Electric & Hybrid Vehicle Technology Expo, which will be held September 10-12 in Novi, Mich., Henkel reports that it will display its latest material technologies for cost-effective high-volume assembly, protection, and thermal control of next-generation electric vehicle (EV) battery systems.

3M recently announced that its commercial vehicle product line is expanding with the addition of CV90F to the 3M™ VHB™ commercial vehicle tape family.

This is a good question for two reasons: first, adhesives and sealants often have to fill large irregular gaps and expansion on curing enables them to achieve this; and second, the products usually shrink on curing.