Six tamper-evident label constructions are reportedly ideal for packaging closures and destructible labeling, while 13 facestock and adhesive combinations that prevent material lifting and adhere to small diameter curves.
August 8, 2019
Acucote has expanded its portfolio with 19 new pressure-sensitive paper and film constructions specifically designed for the pharmaceutical market.
Supreme 3CCM-85 reportedly cures within 2-3 hrs at 175-185°F (80-85°C), which is advantageous for use on heat-sensitive components and substrates.
August 7, 2019
Featuring a combination of thermal conductivity and electrical insulation properties, Master Bond Supreme 3CCM-85 is reportedly a new single-component epoxy initially designed for glob top and chip coating applications.
The base Loctite Liofol LA 2798 adhesive can be combined with different hardeners for specific areas of application.
August 1, 2019
Henkel recently introduced Loctite Liofol LA 2798, a formulation that was reportedly specifically developed for high-performance packaging applications such as thermal processes like sterilization.
These adhesives were reportedly specially formulated for applications in the electronics and consumer electronics industry, where heat-sensitive parts need to be assembled.
July 25, 2019
Techsil recently announced that it has launched a range of new adhesive products with low ion content that cure with UV, visible light, or moisture.
The handbook reportedly serves as a guide for not only regulatory implementation, but also internal reviews and audit preparation.
July 18, 2019
The Society of Chemical Manufacturers & Affiliates (SOCMA) has published the 2019 edition of its Toxic Substances Control Act (TSCA) manual, “TSCA Compliance: A Company Guide,” to serve as an industry resource for companies looking to develop and implement a site-specific TSCA compliance program.
A proprietary hot-melt adhesive, Advantra Warrior™ is reportedly versatile across a range of environments and case and carton sealing applications.
July 16, 2019
H.B. Fuller recently announced the latest in the series of Advantra® advanced-performance adhesive products with the introduction of Advantra Warrior™ in North America.
Sika reports that SikaMelt-675 OT has a broad adhesion spectrum and is suitable for permanent strong bonding of polymers such as ABS, PC, SMC, and PVC; wood and wood-based materials; foams; textiles; aluminum; and painted and primed steel.
July 9, 2019
Sika Corp. recently introduced SikaMelt®-675 OT, a reactive polyurethane hot-melt adhesive for sandwich panel bonding.