Featured on Home Page - Articles - Page 83 | Adhesives & Sealants Industry

Minnesota Seeks Funding in Renewable Energy Initiatives

October 18, 2017

Energy and agriculture experts in Minnesota are working on securing loans and grants for the states renewable energy initiatives by tweaking the energy component to the farm bill.

Top 5 News that Sticks

Readers Clicked Most on H.B. Fuller’s Revenue News

Last week, readers were most interested in H.B. Fuller’s third quarter revenue results.

Teresa McPherson

October 16, 2017

This weekly roundup highlights the adhesives, sealants and coatings news stories that garnered the most attention during the previous week on our website, as well as our eNewsletter and social media platforms.

Case Study

Silo Systems for Safety

Silo protection systems installed at Everbuild’s facility are ensuring the safe storage of dolomite.

October 13, 2017

Leeds-based Everbuild Building Products Ltd., part of the international Sika Group, is one of the UK’s leading sealant, adhesive and building chemical manufacturers, with customers in over 70 countries. It recently installed fully integrated silo protection systems (SPS) by Hycontrol to ensure the ongoing safe and reliable pneumatic filling of powder storage silos. The integrated protection systems, which feature full ground-level testing (GLT) capabilities for all critical system components, have been fitted to two 10-m-high silos used to store finely powdered dolomite.

Harvesting Wheat for Bio-Based Chemicals?

In the OPTISOCHEM project scientist are looking to turn the abundance of wheat straw into a more useful gas called bio-isobutene.

Joan Mantini

October 11, 2017

Researchers are looking at leftover straw from the large amounts of wheat that is currently left unused on European farms to use in the development of greener biochemical.

Top 5 News that Sticks

ViscoTec Expansion News Garners the Most Reader Interest

Last week, ViscoTec’s expansion news received the most clicks.

Teresa McPherson

October 9, 2017

This weekly roundup highlights the adhesives, sealants and coatings news stories that garnered the most attention during the previous week on our website, as well as our eNewsletter and social media platforms.

Focus On

Keeping the Water out

A new surface treatment can make a variety of electronic surfaces waterproof.

October 6, 2017

International Data Corp. (IDC) discovered more than 900,00 smartphones are damaged by liquids every day globally.1 IDC’s research has found that liquid damage is the second-largest cause of damaged smartphones after broken screens, representing 35% of all devices repaired. This damage results in significant costs to the end users, device manufacturers, carriers and retailers, with the impact of liquid damage estimated to be worth nearly $100 billion each year.

Gecko Toe Pads and Shark Fins Inspire Energy Saving Wind Turbines

The development and testing of a new surface coating that could help control the flow around wind turbine blades is being examined to not only increase efficiency, but also in hopes to reduce the maintenance cost in the turbines.

Joan Mantini

October 4, 2017

A company through the Texas Tech University Innovation Hub at Research Park is working on the development of a new product, which originated from using gecko toe pads as their models, that could increase wind turbine efficiency.

Top 5 News that Sticks

Huron Capital New Platform Company News Receives the Most Interest

Last week, news about Huron Capital’s new venture garnered the most reader interest.

Teresa McPherson

October 2, 2017

This weekly roundup highlights the adhesives, sealants and coatings news stories that garnered the most attention during the previous week on our website, as well as our eNewsletter and social media platforms.

Strategic Solutions

A Holistic Approach to Adhesive Selection

Choosing the right adhesive starts with finding a supplier you trust.

James (Jim) E. Swope

October 2, 2017

Adhesive selectors, whether published guides or human, typically begin with determining which adhesive product or products will adhere to the substrate. That approach is necessary for repair applications, and may even be necessary for fixing a production issue on-the-fly. Engineers working in assembly need to consider the functionality of the device first. Adjusting substrate materials, processes, or joint designs may also be considered, but not automatically required. Next, testing to verify performance is necessary—and strongly recommended.

It’s The Assembly Show Time!

The Assembly Show will offer three days of educational sessions, exhibits, a dynamic keynote speaker and plenty of networking.

October 2, 2017

Assembly industry enthusiasts will connect at The Assembly Show, taking place October 24-26 at the Donald E. Stephens Convention Center in Rosemont, Ill. Returning for a fifth year, the event will offer three days of educational sessions, hundreds of exhibiting companies, thousands of industry professionals—including buyers and users of assembly equipment, products or services in manufacturing plants—a dynamic keynote speaker, and two networking receptions.